- Length: 23 cms.

- Knifegrinder.
- Platina handle.
- Ergonomic design.
- Seamless stainless steel handle.
- Higienic surface.
- Perfect balance.
- Long life resistance.

- Length: 30 cms.

- Of hard chromium.
- Hardness 64º Rockwell.
- Magnetized.
- High carbon content.
- Polypropylene handle.
- With hanger.

- Length: 30 cms.

- Of hard chromium.
- Hardness 64º Rockwell.
- Oval.
- Magnetized.
- High carbon content.
- Polypropylene handle.
- With hanger.

-Total length: 300mm

- Sharpene of diamond.

- Whith 25mm and 75 mm length.

- Sharpene consists in faces of diamond/ceramic.
- Leather cover.

- Ceramic stone to sharpen

- Square stone to sharpen

- Ceramic stone to sharpen

- Triangle stone to sharpen

- Of fine grain to finished.

- Profile stone to sharpen

- Of medium grain

- Profile stone to sharpen

- It includes two Profile stones to sharpen:
- One fine stone to sharpen and one medium stone to sharpen

- Set of Profile stone to sharpen

- High hardness with un content of 30% granates.
- Pressence of iron oxide.
- Are stones very durables.

- Stone lenght: 100 mm.
- Stone width: 40 mm.
- Stone thickness: 13 mm.
- Grain 6000-8000 approximality.

- High hardness with un content of 30% granates.
- Pressence of iron oxide.
- Are stones very durables.

- Stone lenght: 100 mm.
- Stone width: 40 mm.
- Up diameter curve of 6 mm y down diameter 2 mm.
- Grain 6000-8000 approximality.- Stone lenght: 200 mm.
- Stone width: 50 mm.
- Stone thickness: 15 mm.
- Grain 6000-8000 approximality.

- High hardness with un content of 30% granates.
- Pressence of iron oxide.
- Are stones very durables.

- Stone lenght: 150 mm.
- Stone width: 50 mm.
- Stone thickness: since 2 mm up to 13 mm.
- Angle of 45º in reduction.
- Grain 6000-8000 approximality.

- High hardness with un content of 35% to 40%.
- Stone for water sharpen of all type of curt tool.

- Irregular piece with measure between 33 and 39 cm².
- Grain 6000-8000 approximality.

-Measures: 32x100 mm.
Made of: Diamond.
-Sheath: Leather.

-Measures: 32x100 mm.
Made of: Diamond and ceramic.
-Sheath: Leather.

-Measures: 25x75 mm. Made of: Diamond and ceramic. -Sheath: Leather.

- Sharpener of diamond fallkniven for stick in sheath of Zytel.

- Measures: 25x75 mm.

- Sharpener of diamond fallkniven for stick in sheath of Zytel.

- Measures: 32x100 mm.

- Sharpener stone with cover

- It uses a unique system of nylon guides injection molding to keep the razor's edge at the specific angle required for optimum sharpening
- To sharpen properly insert the rod into the base of the timber. select the necessary guidance to sharpen his knife. and slide the return spring on it.
- Contains two porcelain sharpening rods: it begins with thick gray bar. and finish the edge with the fine white rod

- The system includes a bar on the knurled aluminum handle and two strands of 600 sandbars diamond grinding.
- The handle and the rods fit neatly into a nylon storage bag.
- Allows the user to maintain a sharp edge on all types of cutting tools.
- After each use. clean the diamond sharpeners alcohol to clean.
- Use dry grinder

- Crossnar sharpener
- Sharpener for penknives
- Lenght 11 cms

- Crossnar sharpener
- Sharpener for penknives
- Lenght 7 cms

- Crossnar sharpener
- Sharpener for penknives
- Lenght 7´5 cms

- Sharpener of diamond stone
- Ideal for tactical knives or machetes
- Pocket sized. allowing you to keep the knife in the sheath

- Sharpener for knives. scissors or penknives.
- Lenght: 30 cms.
- Professional use.
 

- Sharpener for knives. scissors or penknives.
- Lenght: 30 cms.
- Professional use.
 

- Sharpener for cutting tools.
- Lenght: 27 cms.
- Professional use.
 

- Injection molded FRN handles: resin made from fiberglass and nylon reinforced
- Handels have bi-directional texturing covering both sides for tactile traction and slip-resistant grip
- Dual skeletonized stainless liners elevate sturdiness and rigidity without adding weight
- Blades are full flat-ground VG-10 with a thin cutting edge and 13 mm
- Steel: VG-10
- Weight: 3.4 oz
- Overall length-open: 222 mm
- Overall length-closed: 127 mm
- Blade length: 96 mm
- Colour: blue

- Injection molded FRN handles: resin made from fiberglass and nylon reinforced
- Handels have bi-directional texturing covering both sides for tactile traction and slip-resistant grip
- Dual skeletonized stainless liners elevate sturdiness and rigidity without adding weight
- Blades are full flat-ground VG-10 with a thin cutting edge and 13 mm
- Steel: VG-10
- Weight: 3.4 oz
- Overall length-open: 222 mm
- Overall length-closed: 127 mm
- Blade length: 96 mm
- Colour: brown

- Injection molded FRN handles: resin made from fiberglass and nylon reinforced
- Handels have bi-directional texturing covering both sides for tactile traction and slip-resistant grip
- Dual skeletonized stainless liners elevate sturdiness and rigidity without adding weight
- Blades are full flat-ground VG-10 with a thin cutting edge and 13 mm
- Steel: VG-10
- Weight: 3.4 oz
- Overall length-open: 222 mm
- Overall length-closed: 127 mm
- Blade length: 96 mm
- Colour: green

- Injection molded FRN handles: resin made from fiberglass and nylon reinforced
- Handels have bi-directional texturing covering both sides for tactile traction and slip-resistant grip
- Dual skeletonized stainless liners elevate sturdiness and rigidity without adding weight
- Blades are full flat-ground VG-10 with a thin cutting edge and 13 mm
- Steel: VG-10
- Weight: 3.4 oz
- Overall length-open: 222 mm
- Overall length-closed: 127 mm
- Blade length: 96 mm
- Colour: grey

- Injection molded FRN handles: resin made from fiberglass and nylon reinforced
- Handels have bi-directional texturing covering both sides for tactile traction and slip-resistant grip
- Dual skeletonized stainless liners elevate sturdiness and rigidity without adding weight
- Blades are full flat-ground VG-10 with a thin cutting edge and 13 mm
- Steel: VG-10
- Weight: 3.4 oz
- Overall length-open: 222 mm
- Overall length-closed: 127 mm
- Blade length: 96 mm
- Colour: purple

- Built ultra-thin
- The ultra-thin stone marks the sharp decrease to a minimum for a professional sharpening
- Fits the base of 204 Tri-Angle Sharpener
- Measures: 178mm x 13mm.

- Hone ultrafine ceramic sharpening professional finish and large broad leaves. chisels. woodworking tools and even ski and snowboard edges.
- It is light enough to use with the hand. can manage to sharpen large or heavy objects.
- Measures: 76 mm x 203 mm x 6 mm
- Leather pouch included
 

- The tear sharpeners are ideal for curved blades. woodwork and sophisticated edge
- sharpen the edges perfectly flat. concave and convex
- When using the stone on a flat surface. place it on the leather to prevent slipping. To clean. use cold water. soap and an abrasive scouring powder. Rinse and dry.

- The Golden sharpener has different curves and angles to suit the needs of each leaf
- Supporting the sharpener on the outgoing half upright. support one alternative over the other two projections creates a perfect 20 degree angle for sharpening knife blades. The elliptical sides have a large radius for sharpening edges smooth and a smaller radius for sharpening saw blades.
- Supporting the horizontal grinder. has a 12.5 º angle suitable for sharpening scissors.
- The path along the sharpener is suitable for sharpening pointed objects and trimmers.
- The leather case also serves as a support slip.
- To clean. use cold water. soap and an abrasive scouring powder. Rinse and dry

- Length: 20 cm
- Handle: black
- Semi-fine cut

- Length: 23 cm
- Width: 30 cm
- Handle: black
- Semi-fine cut

- Length: 18 cm
- Handle: black
- Semi-fine cut

- Length: 20 cm
- Handle: black nylon
- Semi-fine cut

- Length: 20 cm
- Handle: wood
- Semi-fine cut

- Length: 20 cm
- Handle: rose-wood
- Semi-fine cut

- Length: 20 cm
- Handle: black nylon
- Semi-fine cut

- Length: 23 cm
- Handle: rose-wood
- Semi-fine cut
- Oval

- Length: 26 cm
- Handle: rose-wood
- Semi-fine cut
- Oval

- Length: 27 cm
- Handle: black plastic
- Semi-fine cut
- Oval

- Length: 27 cm
- Handle: brown wood
- Semi-fine cut
- Shape: Round

- Length: 27 cm
- Handle: brown wood
- Semi-fine cut
- Shape: oval

- Length: 27 cm
- Handle: black nylon
- Semi-fine cut
- Shape: Round

- Length: 27 cm
- Handle: black nylon
- Semi-fine cut
- Shape: oval

- Length: 27 cm
- Handle: black plastic
- Semi-fine cut
- Shape: Round

- Length: 30 cm
- Handle: black plastic
- Semi-fine cut
- Shape: Round

- Length: 30 cm
- Handle: black plastic
- Semi-fine cut
- Shape: Oval

- Length: 30 cm
- Handle: black plastic
- Semi-fine cut
- Shape: Round

- Length: 30 cm
- Handle: black plastic
- Semi-fine cut
- Shape: Oval

- Length: 26 cm
- Material: ceramic

- Length: 30 cm
- Handle: brown wood
- Micro-fine cut
- Shape: round
- Hard chrome

- Length: 30 cm
- Handle: brown wood
- Micro-fine cut
- Shape: oval
- Hard chrome

- Length: 30 cm
- Handle: red plastic
- Micro-fine cut
- Shape: round
- Hard chrome

- Length: 30 cm
- Handle: red plastic
- Micro-fine cut
- Shape: oval
- Hard chrome

-  Sharpener for little knife
- USES in: serrated knives and pocketknife

-  Sharpener for little knife
- USES in: domestic knife

- SPARE FOR  SHARPENER 7.8715

- Sharpener with ceramic rolls
- Length: 147 mm
- Widht: 46 mm
- Height: 52 mm

- Sharpener with ceramic rolls
- Length: 147 mm
- Widht: 46 mm
- Height: 52 mm
- COLOUR: BLACK

- Special sharpener ceramic knives
- To gauge sharp

- Sharpens all knives and cutting tools with a 'V' shaped blades
- Diamond carbide sharpener
- Safety bar to protect yourself from the knife
- No oil needed - sharpen dry or with water
- Sharpens straight and serrated blade

- Ultra portable. key chain sharpener
- Fine diamond to transform a dull edge
- Sharpens knives faster than conventional stones
- No oil needed - sharpen dry or with water
- Durable construction will provide years of consistent performance and reliable service

- Round sharpener
- Hard chrome
- For sharpeneing unserrated knives
- Weight: 161 gr
- Length: 20 cm

- Total Length: 11.4 cm
- Protection plastic cover

- Size 4.2 x 11.1 cm