 |
|||
|
|||
|
VICTORINOX SWISS ARMY KNIFE
The brilliant idea and prescribes of the success of
multipurpose VICTORINOX knife was the multiple advantage of each one of the wharves; one is six
leaves on two wharves, which makes a so slight and elegant form possible.
For the two sharp leaves of the Swiss knife multipurpose
and pocketknives a stainless
steel for knives is used special, made up of an alloy of chromium and
molybdenum. That after tempering it to 1.040° and of dissolve it to 160°,
the leaves obtain a hardness of RC 56 (RC it is Rockwell C, the unit of the
hardness).
The mountain ranges of wood, scissors and you file of
nails of the multipurpose knives have a hardness of RC 53. The mountain ranges and you file for metals
are warmed up by cementation and hard chromed, with them iron and steel can be
cut and be filed until. The screwdrivers, can openers and awls have a hardness
of RC 52, whereas the corkscrews and wharves of RC 49.
For the wood mountain range of knife multipurpose VICTORINOX
obtaining considered the maximum possible length. All their teeth very are
sharpened and thanks to a greater superficial tempering, the sharpened one of
the mountain range and files for metals is conserved by more time.
The mini screwdriver of the multipurpose swiss army knife integrated in the
corkscrew (for example the one of the small screws of the glasses) is a
development patented by VICTORINOX.
The intermediate layers (plates) of the knives
multipurpose VICTORINOX, from
1951, are done of an aluminum alignment that was able to lighten its weight
and to do them easier to take in the pocket of the trousers. The rivets and
rosettes of the multipurpose knives VICTORINOX are done of brass, and the handles of
Cellidor.
On the great leaf of the knife multipurpose VICTORINOX the wharf exerts a pressure
of almost 12 kilos, whereas in the side opposed of the knife multipurpose, on the small
leaf the wharf exerts a pressure of 8 kilos. The high tension of the wharf is
perceivable in the typical expression of the click that is heard at the time
of unite the open leaf. The tension of the wharf does not yield with the use
of the knife throughout the years.
No other can opener of swiss army knife reaches the quality of can
opener VICTORINOX, patented in 1951. This can opener has a small appropriate
screwdriver to screws of grooved head and in cross of Philips.
Only knives multipurpose VICTORINOX have the intermediate aluminum
layer that is contiguous with the corkscrew equipped with a surface of
vitreous and resistant weather to abrasion. This valuable superficial
treatment causes that the pieces are three more expensive times.
The reel and the awl are equipped with an efficient edge
thanks to two passages of additional works with the striker pin.
In order to sharpen the leaves of swiss army knives VICTORINOX it
recommends the use of a leaf to smooth.
In order to guarantee the perfect state of each one of the
swiss army knife multipurpose VICTORINOX there are 90 people destined to the final control. In that final
control of the perfect elaboration of the knives each leaf of each one of the
knives is controlled by hand that leave the production. The knife and
pocketknives VICTORINOX
guarantee includes by a limitless time any type of manufacture and material
defect
[Home] [Victorinox swiss army knife] [Victorinox products] [Victorinox pocket knives] [Victorinox knife] [Victorinox scissors] [Victorinox sheats] [Victorinox accesories]
Pocket
knives and knives, Aceros de Hispania
|
