Regulators Pressure Regulator for SPA PP700

Pressure regulator for SPA PP700 PCP air pistol. This model will give you a more consistent performance and improved accuracy. The installation is really simple and you donYou need to unscrew the Quick-Fill first and then screw the mounting stick on the regulator. All you need to do next is to push the regulator into the middle portion of the valve, unscrew the mounting stick and screw the Quick-Fill back.The pressure output can be adjusted with the flat head screwdriver from 100 to 150 bar. The total scale range corresponds to approximately 1/2 turn. Unscrewing, or screwing the setting screw for more than one turn may result in failure of the regulation. To increase the pressure you need to turn the setting screw counterclockwise. To decrease the pressure you must turn it clockwise.