Spyderco pocket knives

- Blade length: 73 mm.
- Blade thickness: 2,5 mm.
- Blade hole diameter: 12 mm.
- Total Weight: 71 gr.
-Open length: 178 mm.
- Close length: 108 mm.

- Steel AUS-6 blade.
- FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Without edge
- It includes clip to hang

- The smallest blade of the full range
- Opening knife with one hand without locking mechanism
- Stainless steel handle available for engraving or embellishment
- Hole in the handle to put a string key chain.
- Sheet steel 3CR
- Available in plain edge
- Weight: 12gr
- Overall length open: 73 mm
- Total length closed: 41 mm
- Length of blade: 33 mm

- Military penknife with camouflage handle
- The perfect stainlee blade and a slim G-10 handle. it fells like a natural extension of the hand
- Its oversized blade hole supoorts positive one handed deplyment  even while wearing gloves and its open-handle contruction allows debris to be easily flushed or mance in the hastest operational envioroments.
- Made in Golden. Colorado
- G-10 laminate handle scales
- Sine and choil jimping
- Screw-together construction
- 14 mm spyderco Round hole (for gloved hand)
- Flat-ground modified clop-point blade
- Weight: 4.25 oz
- Overall length open: 241 mm
- Overall length close: 140 mm
- Blade length: 102 mm

- Blade length: 79 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 14 mm.
- Length edge: 67 mm.
- Total Weight: 64 gr.
- Open length: 183 mm.
- Close length: 104 mm.

- Steel VG-10 blade.
- Black FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Spyder edge.
- It includes clip to hang

- The ZDP-189 blades are stronger than other blades and it has better perfomance
- 4 positions for steel clip: Left / right / top up / top down
- Assembly screws
- Prints lightweight steel interior
- Brass rings
- FRN handle Volcano green GRIPTM "British Racing"
- Sheet saber profile
- Plain Edge
- Overall length: 181 mm
- Closed length: 108 mm
- Blade length: 73 mm
- Weight: 71 gr

- Military penknife with camouflage handle
- The perfect stainlee blade and a slim G-10 handle. it fells like a natural extension of the hand
- Its oversized blade hole supoorts positive one handed deplyment  even while wearing gloves and its open-handle contruction allows debris to be easily flushed or mance in the hastest operational envioroments.
- Made in Golden. Colorado
- G-10 laminate handle scales
- Sine and choil jimping
- Screw-together construction
- 14 mm spyderco Round hole (for gloved hand)
- Flat-ground modified clop-point blade
- Weight: 1.25 oz
- Overall length open: 241 mm
- Overall length close: 140 mm
- Blade length: 102 mm

- Penknife with a black coating of carbon nitrate to reduce their visibility.
- Ambidextrous. Transport tip up. Titanium clip
- FRN Volcano Grip handle in black: resin made from fiberglass and nylon reinforced
- Clamping hole to pass a belt or a rope
- Round Hole 14mm Spyderco
- Smooth Edge
- Longiutd open total: 219 mm
- Total length closed: 125 mm
- Length of blade: 97 mm

- Blade length: 102 mm.
- Blade thickness: 4 mm.
- Blade hole diameter: 14 mm.
- Length edge: 94 mm.
- Total Weight: 120 gr.
- Open length: 242 mm.
- Close length: 139 mm.

- Steel CPM-S30V blade.
- G-10 handle.
- Combinated edge (plain and spyder edge).
- It includes clip to hang

- Blade length: 102 mm.
- Blade thickness: 4 mm.
- Blade hole diameter: 14 mm.
- Length edge: 94 mm.
- Total Weight: 120 gr.
- Open length: 242 mm.
- Close length: 139 mm.

- Steel CPM-S30V blade.
- G-10 handle.
- Plain edge.
- It includes clip to hang

- Closed penknife 127mm
- Overall penknife 222mm
- Lenght of blade: 96mm
- Blade steel ZDP-189
- Weight: 103gr.

- 4 way clip: tip up/down, left/right hand
- Screw together construction
- Skeletonized steel internal liners
- Phosphor bronze bushings
- British Racing Green FRN Volcano Grip handle
- David Boye Dent
- Flat saber-ground blade
- Plain edge

- Small handle better ergonomics
- The profile of the film is simplified by eliminating any angle to save more comfortably in your pocket
- Sheet steel with G-10 material
- Completely flat sheet that provides comfort and performance
- Weight: 107 gr
- Overall length open: 210 mm
- Overall length close: 122 mm
- Blade length: 87 mm
 

- Ladybug knife with blade steel H-1.
- Non-skid yellow handle
- No clip
- Slots in the back
- David Boye Dent
- Opening Round Hole larger diameter
- Smooth Edge
- FRN handle: resin made from fiberglass and nylon reinforced
- Weight: 18 gr
- Overall length open: 111 mm
- Total length closed: 62 mm
- Length of blade: 49 mm

- Ladybug knife with blade steel H-1.
- Non-skid yellow handle
- No clip
- Slots in the back
- David Boye Dent
- Opening Round Hole larger diameter
- Saw Edge
- FRN handle: resin made from fiberglass and nylon reinforced
- Weight: 18 gr
- Overall length open: 111 mm
- Total length closed: 62 mm
- Length of blade: 49 mm

- Carbon Fiber Handle
- Carbon filaments in the fiber does not heat up to high temperatures
- Very resistant material gives the blade strength and wear resistance without adding weight to the knife
- Blade: VG-10
- Weight: 154 gr
- Overall length open: 238 mm
- Overall length close: 333 mm
- Blade length: 108 mm

- Copy of the Atlantic Salt Knife. a third lower.
- Ambidextrous. Transport tip up. Titanium clip
- FRN Volcano Grip handle in black: resin made from fiberglass and nylon reinforced
- Clamping hole to pass a belt or a rope
- Round Hole 14mm Spyderco
- Saw Blade
- Weight: 61 gr
- Overall length open: 182 mm
- Total length closed: 104 mm
- Length of blade: 79 mm

- Closed penknife 108mm
- Overall penknife 182mm
- Lenght of blade: 74mm
- Blade steel VG-10
- Weight: 72gr.

- 4 way clip: tip up/down, left/right hand
- Screw together construction
- Skeletonized steel internal liners
- Phosphor bronze bushings
- Charcoal Gray FRN Volcano grip handle
- David Boye Dent
- Flat saber-ground blade
- Plain edge

- With steel blade of 154 cm
- With 154CM steel blade
- Closing Ball Bearing
- The edge of the blades of the handle is grooved to increase grip
- Made in Golden. Colorado
- Ambidextrous. Transport tip up
- Round Hole 14mm Spyderco
- G-10 Handle
- Hollow-ground blade with spine swedge
- Combine blade
- Weight: 2.5 oz
- Overall length open: 143 mm
- Overall length close: 86 mm
- Blade length: 59 mm

- Copy of the Atlantic Salt Knife. a third lower.
- Ambidextrous. Transport tip up. Titanium clip
- FRN Volcano Grip handle in yellow: resin made from fiberglass and nylon reinforced
- Clamping hole to pass a belt or a rope
- Round Hole 14mm Spyderco
- Saw Blade
- Weight: 61 gr
- Overall length open: 182 mm
- Total length closed: 104 mm
- Length of blade: 79 mm

- Blade length: 105 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 12 mm.
- Length edge: 95 mm.
- Total Weight: 134 gr.
-Open length: 233 mm.
- Close length: 132 mm.

- Steel VG-10 blade.
- G-10 (C12GS) handle .
- Spyder edge.
- It includes clip to hang

- Closed penknife 108mm
- Overall penknife 181mm
- Lenght of blade: 73mm
- Blade steel VG-10
- Weight: 71gr.

- 4 way clip: tip up/down, left/right hand
- Screw together construction
- Skeletonized steel internal liners
- Phosphor bronze bushings
- Foliage Green FRN Volcano Grip handle
- David Boye Dent
- Flat saber-ground blade
- Plain edge

- Identical to the live  version in size. balance and proportion but wich a non-sharpened blade for safe practice.
- Red G-10 handle denotes it a trainer
- Made in Golden. Colorado
- Ambidiextrous tip-up clip
- Encased Ball Bearing Lock
- G-10 handle with full steel liners
- Screw-together construction
- Non-sharpener blade
- Weight: 107 gr
- Overall length open: 187 mm
- Overall length close: 111 mm
- Blade length: 76 mm