Spyderco pocket knives

- Blade length: 73 mm.
- Blade thickness: 2,5 mm.
- Blade hole diameter: 12 mm.
- Total Weight: 71 gr.
-Open length: 178 mm.
- Close length: 108 mm.

- Steel AUS-6 blade.
- FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Without edge
- It includes clip to hang

- The smallest blade of the full range
- Opening knife with one hand without locking mechanism
- Stainless steel handle available for engraving or embellishment
- Hole in the handle to put a string key chain.
- Sheet steel 3CR
- Available in plain edge
- Weight: 12gr
- Overall length open: 73 mm
- Total length closed: 41 mm
- Length of blade: 33 mm

- Military penknife with camouflage handle
- The perfect stainlee blade and a slim G-10 handle. it fells like a natural extension of the hand
- Its oversized blade hole supoorts positive one handed deplyment  even while wearing gloves and its open-handle contruction allows debris to be easily flushed or mance in the hastest operational envioroments.
- Made in Golden. Colorado
- G-10 laminate handle scales
- Sine and choil jimping
- Screw-together construction
- 14 mm spyderco Round hole (for gloved hand)
- Flat-ground modified clop-point blade
- Weight: 4.25 oz
- Overall length open: 241 mm
- Overall length close: 140 mm
- Blade length: 102 mm

- Copy of the Atlantic Salt Knife. a third lower.
- Ambidextrous. Transport tip up. Titanium clip
- FRN Volcano Grip handle in yellow: resin made from fiberglass and nylon reinforced
- Clamping hole to pass a belt or a rope
- Round Hole 14mm Spyderco
- Saw Blade
- Weight: 61 gr
- Overall length open: 182 mm
- Total length closed: 104 mm
- Length of blade: 79 mm

- Closed penknife 108mm
- Overall penknife 182mm
- Lenght of blade: 74mm
- Blade steel VG-10
- Weight: 72gr.

- 4 way clip: tip up/down, left/right hand
- Screw together construction
- Skeletonized steel internal liners
- Phosphor bronze bushings
- Charcoal Gray FRN Volcano grip handle
- David Boye Dent
- Flat saber-ground blade
- Plain edge

- With steel blade of 154 cm
- With 154CM steel blade
- Closing Ball Bearing
- The edge of the blades of the handle is grooved to increase grip
- Made in Golden. Colorado
- Ambidextrous. Transport tip up
- Round Hole 14mm Spyderco
- G-10 Handle
- Hollow-ground blade with spine swedge
- Combine blade
- Weight: 2.5 oz
- Overall length open: 143 mm
- Overall length close: 86 mm
- Blade length: 59 mm

- The ZDP-189 blades are stronger than other blades and it has better perfomance
- 4 positions for steel clip: Left / right / top up / top down
- Assembly screws
- Prints lightweight steel interior
- Brass rings
- FRN handle
- Plain Edge
- Overall length: 141 mm
- Closed length: 84 mm
- Blade length: 57 mm
- Weight: 34 gr

- Blade length: 105 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 12 mm.
- Length edge: 95 mm.
- Total Weight: 134 gr.
-Open length: 233 mm.
- Close length: 132 mm.

- Steel VG-10 blade.
- G-10 (C12GS) handle .
- Spyder edge.
- It includes clip to hang

- Closed penknife 108mm
- Overall penknife 181mm
- Lenght of blade: 73mm
- Blade steel VG-10
- Weight: 71gr.

- 4 way clip: tip up/down, left/right hand
- Screw together construction
- Skeletonized steel internal liners
- Phosphor bronze bushings
- Foliage Green FRN Volcano Grip handle
- David Boye Dent
- Flat saber-ground blade
- Plain edge

- Identical to the live  version in size. balance and proportion but wich a non-sharpened blade for safe practice.
- Red G-10 handle denotes it a trainer
- Made in Golden. Colorado
- Ambidiextrous tip-up clip
- Encased Ball Bearing Lock
- G-10 handle with full steel liners
- Screw-together construction
- Non-sharpener blade
- Weight: 107 gr
- Overall length open: 187 mm
- Overall length close: 111 mm
- Blade length: 76 mm

- Penknife of high performance. long life. light weight and high strength
- Steel blade with a 2% carbon
- Blade with a hole of 14 mm
- Special for use with gloves
- Titanium handle with locking system
- Make hard and aggressive cuts
- Total length: 241 mm
- Length closed: 140 mm
- Blade length: 102 mm
- Weight: 157 gr

- Blade length: 94 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 14 mm.
- Edge length: 81 mm.
- Total Weight: 115 gr.
- Open length: 213 mm.
- Close length: 124 mm.

- Steel VG-10 blade.
- FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Combinated edge (plain and spyder edge).
- It includes:
Clip to hang it can be put in the right or the left to adapt to the left-handed people
Whistle of acute tone.
- An end ”carbide”, lodged in the handle, to break crystals

- Closed penknife 105mm
- Overall penknife 186mm
- Lenght of blade 81mm
- Blade steel CPM-S30V
- Weight 94gr

- Ambidextrous tip-up clip
- Ptented encased Ball Bearing Lock
- Screw construction
- Flat-ground blade
- Plain edge

- FRN handle (resin made ??from reinforced fiberglass and nylon).
- Blade steel VG-10 carbon nitride coated non-reflective black
- Combined Edge
- Clip for hanging that can be put on the right or left to suit left-handers
- High-pitched whistle
- The handle is black fiberglass reinforced nylon light
- Total length: 214 mm
- Length closed: 122 mm
- Length of blade: 94 mm
- Weight: 113 gr

- Blade length: 97 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 12 mm.
- Edge length: 86 mm.
- Total Weight: 86 gr.
- Open length: 219 mm.
- Close length: 125 mm.

- Steel H-1 blade.(Complet stainless steel with edge retention)
- FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Plain edge
- It includes a clip to hang.

- Blade length: 97 mm.
- Blade thickness: 3 mm.
- Blade hole diameter: 12 mm.
- Edge length: 86 mm.
- Total Weight: 86 gr.
- Open length: 219 mm.
- Close length: 125 mm.

- Steel H-1 blade.(Complet stainless steel with edge retention)
- FRN handle (resin from elaborated with reinforced fiber glass and nylon).
- Spyder edge
- It includes a clip to hang.

- Very light knife
- Carbon Fiber Handle
- Handle slip through the texture of mango
- Ambidestro
- Close linerlock sheet
- Slots mustache and loin
- Sheet steel straight profile CPM-S30V
- Smooth Edge
- Weight: 91 gr
- Overall length open: 181 mm
- Total length closed: 106 mm
- Length of blade: 76 mm

- Closing Ball Bearing: ball bearing allows locking round
- The edge of the blades of the handle is grooved to increase grip.
- Made in Golden. Colorado
- Ambidextrous. Transport tip up
- Round Hole 14mm Spyderco
- G-10 Handle
- Plain Edge
- Total length: 203mm
- Length closed: 117 mm
- Length of blade: 86 mm
- Weight: 120 gr

- Blade length: 73 mm.
- Blade thickness: 2,5 mm.
- Blade hole diameter: 12 mm.
- Hardness: Rc 57-58.
- Total Weight: 114 gr.
-Open length: 179 mm.
- Close length: 106 mm.

- Steel AUS-6 blade.
- Stainless steel handle.
- Combinated edge (plain and spyder edge)
- It includes clip to hang

- Blade length: 73 mm.
- Blade thickness: 2,5 mm.
- Blade hole diameter: 12 mm.
- Hardness: Rc 57-58.
- Total Weight: 114 gr.
-Open length: 179 mm.
- Close length: 106 mm.

- Steel AUS-6 blade.
- Stainless steel handle.
- Spyder edge
- It includes clip to hang

- Blade length: 73 mm.
- Blade thickness: 2,5 mm.
- Blade hole diameter: 12 mm.
- Hardness: Rc 57-58.
- Total Weight: 114 gr.
-Open length: 179 mm.
- Close length: 106 mm.

- Steel AUS-6 blade.
- Stainless steel handle.
- Plain edge.
- It includes clip to hang