german armorarms of xvth marshall historical (ref.: MH-A0813)
Characterists:
In German medieval armor, combined arms still use media mesh, more typical of the Milanese armor; however, the comfort and versatility of these arms bound together by leather points gives ease of mocimiento and easily be repaired if damaged. The arms have several holes to raise or lower the height of the strut and armbands, belts help to better hold the arm.
- It has a leather tab to be set to the desired height.
- We suggest use with arming our jaqueta MH-CL0800.
Specifications:
- The arms are steel armor 1'2mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 58 Cm. High: 15 Cm. Width: 25 Cm.
|
55,84 € 93,06 €
($ 66,59 USD)
% 40 OFF
Stock: 1
Product added
|
|
|
buckler b 31cm marshall historical (ref.: MH-A1263B)
Characterist:
The buckler is a very defensive support weapon used in Europe for soldiers of all classes, from the Middle Ages to the Renaissance. The use of this piece of armor is dated in many stories and treatises of the period. Perfect protection for your medieval armor historical recreation.
- Diameter: 31cm.
Specifications:
- The thickness of the sheet steel is 1'6mm.
- The thickness of the steel flange is 2'5mm.
Length: 34 Cm. High: 10 Cm. Width: 34 Cm.
|
€ 49,43 Euros
($ 58,95 USD)
Product added
|
|
|
churburg shoulders xvth century. marshall historical (ref.: MH-A0940)
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. This armor is known as "S18" in the armory of Churburg, are attached to the pad window. This medieval armor supposedly belonged to Where Matsch and is said to be a Lombard work.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 168,10 Euros
($ 200,48 USD)
Product added
|
|
|
sabatons marshall historical (ref.: MHR-A0915)
Characterist:
The sabatons are a bonded plates that protect the foot, part of the armor and were very common in the cavalry. Perfect protection for your medieval armor historical recreation.
Specifications:
- the sabatons are made from 2mm steel.
- The thickness of the steel may vary due to handcrafting our products.
- Length Max: ~ 30cm (adjustable by leather strap)
- Maximum Width: ~ 13cm Overall width (the metal can be bent to adjust the width slightly)
- Height max: ~ 11cm-12cm
Length: 30 Cm. High: 12 Cm. Width: 16 Cm.
|
€ 117,09 Euros
($ 139,64 USD)
Product added
|
|
|
gorget xvith century marshall historical (ref.: MH-A0788A)
Characterist:
This gorget is styled in Central Europe. In this combination, protection is rigid but articulated at the neck to achieve a great improvement in effectiveness. A versatile and simple gorget is an excellent choice for any infant or mercenary knight of the XVIth century. A perfect choice for your armor of medieval historical recreation.
- This model has a slightly raised collar, and closed by rivet.
Specifications:
- The gorget this fact 1'6mm steel.
- The thickness of the steel may vary due to handcrafting our products.
Length: 34 Cm. High: 14 Cm. Width: 28 Cm.
|
€ 91,83 Euros
($ 109,52 USD)
Product added
|
|
|
leather hand protection marshall historical (ref.: MH-S0700H-DE)
This protection is made ??of hardened leather using strong seams. The interior is padded and lined with suede for comfort.
- The leather is ready to be dyed and personalized. We have to make the holes to size.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
- The tinting is made by natural methods and the finish may vary depending on the initial skin color.
|
€ 79,55 Euros
($ 94,87 USD)
Product added
|
|
|
besagew marshall historical (ref.: MHR-A1270)
Characterist:
The lunettes are steel plates that is added to the frame for added protection. Perfect protection for your medieval armor historical recreation.
- Diameter: 9´65mm.
Specifications:
- the lunettes are made ??from 2mm steel.
- The thickness of the steel may vary due to handcrafting our products.
Length: 11 Cm. High: 2 Cm. Width: 11 Cm.
|
€ 21,36 Euros
($ 25,47 USD)
Product added
|
|
|
gorget xviith century marshall historical (ref.: MH-A0788B)
Characterist:
This gorget is styled in Central Europe. In this combination, protection is rigid but articulated at the neck to achieve a great improvement in effectiveness. A versatile and simple gorget is an excellent choice for any infant or mercenary knight of the XVIIth century. A perfect choice for your armor of medieval historical recreation.
- This model has a slightly raised collar, and closed by rivet.
Specifications:
- The gorget this fact 1'6mm steel.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 91,83 Euros
($ 109,52 USD)
Product added
|
|
|
leather arms protection marshall historical (ref.: MH-S0700F)
This protection is made of hardened leather using strong seams. The interior is padded and lined with suede for comfort.
- The leather is ready to be dyed and personalized. We have to make the holes to size.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
- The tinting is made by natural methods and the finish may vary depending on the initial skin color.
|
€ 147,01 Euros
($ 175,32 USD)
Product added
|
|
|
armorarms marshall historical (ref.: MH-A0913)
Characterist:
These arms of the XVth century armor codal round knife and carved anew, might be an excellent example of Italian arms of the years 1400 and 1500. Arms armor is a flexible and versatile protection that can be combined with many different pieces for a large variety of possibilities.
Specifications:
- The arms are steel armor 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 55 Cm. High: 18 Cm. Width: 35 Cm.
|
€ 187,71 Euros
($ 223,86 USD)
Product added
|
|
|
gorget without neck xvith century marshall historical (ref.: MH-A0788C)
Characterist:
This gorget is styled in Central Europe. In this combination, protection is rigid but articulated at the neck to achieve a great improvement in effectiveness. A versatile and simple gorget is an excellent choice for any infant or mercenary knight of the XVIth century. A perfect choice for your armor of medieval historical recreation.
Specifications:
- The gorget this fact 1'6mm steel.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 91,71 Euros
($ 109,37 USD)
Product added
|
|
|
|
€ 39,61 Euros
($ 47,24 USD)
Product added
|
|
|
leather elbow suede leather for medieval recreation (ref.: MHR-A0935S)
Characterist:
These pieces of leather and steel to protect arm in armor, they are very agile and efficient road and ease in combat. These arms of three pieces in a way reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside.
- One size adjustable.
Specifications:
- The arms are split and steel 1'4mm.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
- The tinting is made by natural methods and the finish may vary depending on the initial skin color.
|
€ 169,32 Euros
($ 201,93 USD)
Product added
|
|
|
gorget with scope xvith century marshall historical (ref.: MH-A0943)
Characterist:
This gorget is styled in Central Europe. In this combination, protection is rigid but articulated at the neck to achieve a great improvement in effectiveness. A versatile and simple gorget is an excellent choice for any infant or mercenary knight of the XVIth century. A perfect choice for your armor of medieval historical recreation.
Specifications:
- The gorget this fact 1'6mm steel.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 99,94 Euros
($ 119,19 USD)
Product added
|
|
|
armorarms a of xiiith marshall historical (ref.: MH-A0770)
Características:
These arms of the thirteenth century armor codal round knife and carved anew, might be an excellent example of Italian arms of the years 1390 and 1450. Arms armor is a flexible and versatile protection that can be combined with many different pieces for a large variety of possibilities.
Specifications:
- The arms are steel armor 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 39 Cm. High: 15 Cm. Width: 25 Cm.
|
€ 161,95 Euros
($ 193,14 USD)
Product added
|
|
|
suede shinguards marshall historical (ref.: MHR-A0933S)
Characterist:
These pieces of leather and steel to protect the legs in armor are very agile and efficient road and easily get in a fight. These leg guards somewhat reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside.
- One size adjustable.
Specifications:
- The pads are suede and steel 1'4mm.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
- The tinting is made by natural methods and the finish may vary depending on the initial skin color.
|
€ 97,21 Euros
($ 115,93 USD)
Product added
|
|
|
armorarms c of xivth marshall historical (ref.: MH-A0905)
Characterists:
These arms are for armor of the fourteenth century, based on several funerary brasses, this style of media-arms with windows you can see combined with chain mail and maniquetes. Armor arms are flexible and versatile protection that can be combined with many different parts for a wide range of possibilities.
- One size adjustable.
Specifications:
- The arms are steel armor 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 48 Cm. High: 17 Cm. Width: 21 Cm.
|
€ 147,01 Euros
($ 175,32 USD)
Product added
|
|
|
avant shinguards marshall historical (ref.: MH-A0919)
Characterist:
These pieces of steel to protect the legs in armor they are very agile and efficient road and ease in combat. These leg guards somewhat reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside.
- One size adjustable. (front: 34cm, side: 38cm, inner circumference: 44'5cm).
Specifications:
- The pads are steel 1'6mm.
- The thickness of steel can vary due to the manufacture of our products atresanal.
Length: 41 Cm. High: 14 Cm. Width: 27 Cm.
|
€ 160,48 Euros
($ 191,39 USD)
Product added
|
|
|
german legs xvth century marshall historical (ref.: MH-A0902)
Characterist:
These legs are proper protections for the of the XVth century Germany, are very important for the cavalry, more protections are used for this type of troops. The work of these German legs is a work of undeniable beauty. These legs are a replica armor from southern Germany, which is now in an exhibition in Berlin. The lateral hinge system is also typical of the Valdemar Part VI that is currently in the Royal Armouries.
- One size adjustable.
Specifications:
- Legs Armor are 1'2mm steel.
- The thickness of steel can vary due to the manufacture of our products atresanal.
- It has a satin finish, which means it has a slightly reflective surface, similar to the finishes of the original frames.
Length: 68 Cm. High: 26 Cm. Width: 22 Cm.
|
€ 318,64 Euros
($ 380,01 USD)
Product added
|
|
|
bracers of xiiith marshall historical (ref.: MH-A0781)
Characterists:
Armbands or bracelets are part of the armor that protects the forearm, were very useful in medieval times, as it was a part of the body which he received many lunges. This bracelet is perfect for steel and medieval recreations.
- One size.
Specifications:
- Armband is 1'2mm steel.
- The thickness of the steel may vary due to handcrafting our products.
Length: 21 Cm. High: 9,5 Cm. Width: 11,5 Cm.
|
€ 39,12 Euros
($ 46,65 USD)
Product added
|
|
|