Sharpener stones

- Size: 15 x 5 x 2 cm
- Set of natural sharpening stone grain 700. 1200 and 4000
- Sharpeners for:

  * Emptying (grain 700): to retreive the discharge channel of a tool, allowing a proper termination for scythes and sickles. And it is first step to recovery of knives and tools discarded by nicks in the edge
  * Refininf (grain 1200): Lets leave the edfe of the knives and tools with a perfect cut quality
  * Polish (grain 4000): this allows the perfection of the blades. after the previous steps. You will get a special edge. suitable for filleting meat and fish

- Use tri-fold both edges and the faces of the stones
- Always use dipped in water. never oil

- Triangular model of survival
- Sharpener grain 700. 1200 y 4000
- Sharpener to emptying. refine and polish
- Format designed to have in our hand a complete solution
- Attaches to yhe wirst by a security cordon
- Use from back to edge. from handle to tip
- Use always soacked in water. never oil

- Sharpener doyble compossed of two natural stone grain 1200 and grain 1800
- Sharpener for refine (grano 1200) and pulish (grain 1800)
- Format designed for a single tool that we have an effective sharpening
- Distinguished in the geometry of the part edges and ridges
- Use for sharpening edges. first in 1200 grain and after in the 1800 grain.
- The flat side. use them to keep the edges.
- Use from back to edge. from handle to tip
- Use always soaked in water. never oil

- Built ultra-thin
- The ultra-thin stone marks the sharp decrease to a minimum for a professional sharpening
- Fits the base of 204 Tri-Angle Sharpener
- Measures: 178mm x 13mm.

- Hone ultrafine ceramic sharpening professional finish and large broad leaves. chisels. woodworking tools and even ski and snowboard edges.
- It is light enough to use with the hand. can manage to sharpen large or heavy objects.
- Measures: 76 mm x 203 mm x 6 mm
- Leather pouch included
 

- The tear sharpeners are ideal for curved blades. woodwork and sophisticated edge
- sharpen the edges perfectly flat. concave and convex
- When using the stone on a flat surface. place it on the leather to prevent slipping. To clean. use cold water. soap and an abrasive scouring powder. Rinse and dry.

- The Golden sharpener has different curves and angles to suit the needs of each leaf
- Supporting the sharpener on the outgoing half upright. support one alternative over the other two projections creates a perfect 20 degree angle for sharpening knife blades. The elliptical sides have a large radius for sharpening edges smooth and a smaller radius for sharpening saw blades.
- Supporting the horizontal grinder. has a 12.5 º angle suitable for sharpening scissors.
- The path along the sharpener is suitable for sharpening pointed objects and trimmers.
- The leather case also serves as a support slip.
- To clean. use cold water. soap and an abrasive scouring powder. Rinse and dry

- Ceramic stone to sharpen

- Square stone to sharpen

- High hardness with un content of 30% granates.
- Pressence of iron oxide.
- Are stones very durables.

- Stone lenght: 200 mm.
- Stone width: 50 mm.
- Stone thickness: 15 mm.
- Grain 6000-8000 approximality.

- High hardness with un content of 30% granates.
- Pressence of iron oxide.
- Are stones very durables.

- Stone lenght: 100 mm.
- Stone width: 40 mm.
- Up diameter curve of 6 mm y down diameter 2 mm.
- Grain 6000-8000 approximality.- Stone lenght: 200 mm.
- Stone width: 50 mm.
- Stone thickness: 15 mm.
- Grain 6000-8000 approximality.

- Ceramic stone to sharpen

- Triangle stone to sharpen