|
|
We can make direct shipments to United States of all products that we have on our website.
Shipping costs are automatically calculated after adding products to the shopping cart.
The delivery Time of our products varies between ten and fifteen days.
For the purchase of Blank Firing Guns, you MUST indicate us your Weapons License Number
|
Daggers
Battle ready medieval daggers
genesis machete
(ref.: 501238)
This machete is made of tempered 1085 high carbon steel with full tang.
Wood scales sandwich the full profile tang and are wrapped in suede.
This sharpened machete comes with a genuine leather sheath and baldric with solid brass hardware.
Meant to be worn over the right shoulder for an underhand, left side draw.
This ensures your right hand stays free to draw that firearm you'll no doubt be carrying.
This sharpened knife comes with a genuine leather sheath and baldric with solid brass hardware.
Overall length of 25 inches.
- Overall: 25"
- Blade: Length 17
- 3/4" Thickness 3/16"
- Weight: 2 lb
- Material: 1085 High Carbon
Made by Windlass Steelcrafts®
|
€ 61,42 Euros
($ 73,25 USD)
 Product added
|
|
|
|
|
|
€ 95,01 Euros
($ 113,31 USD)
Product added
|
|
|
|
excalibur dagger
(ref.: 732)
Exclusive Excalibur Dagger,
- Details of the handle with engravings and contrasts.
- Grip silver finish.
- Tempered Stainless Steel Blade.
- Overall: 40 cm/15 inches
High Quality Dagger of the Exclusive Collection of “Historic Daggers" made by MARTO.
Certificate of Origin and Quality.
Made in Toledo, Spain.
|
€ 72,55 Euros
($ 86,52 USD)
Product added
|
|
|
|
402532 cobra steel falcata
(ref.: 402532)
The design of this Cobra falcata is one of the best in history. A must for lovers of outdoor activities. The blade of this Windlass Cobra Steel Falcata is hand forged high grade X46Cr13 stainless steel that has been fully tempered in computer controlled furnaces. This also makes it strong and weather resistant for outdoor use. Hardened at 48 ° Rockwell, it allows it to bend and return to its initial position. Simple design for perfect functionality. It features a weather-resistant rubber handle for comfort, firm grip and impact resistance, providing excellent one-handed performance by absorbing all shocks. The grip is intentionally longer than most machetes for second-hand grip when additional cutting is needed. Experience the difference this Falcata Cobra can make!
Comes with a sharp edge and includes a riveted leather belt sheath.
Total Length: 53 cm
Blade Length: 37 cm
Blade Width: 5 cm
Blade Thickness: 0.47 cm
Weight: 567 g
Material X46Cr13 Stainless
Manufactured by Windlass Steelcrafts®
|
€ 52,29 Euros
($ 62,36 USD)
Product added
|
|
|
|
templar dagger
(ref.: 733)
Exclusive Templar Dagger,
- Details of the handle with engravings and contrasts.
- Grip silver finish.
- Tempered Stainless Steel Blade.
- Overall: 45 cm/17 inches
High Quality Dagger of the Exclusive Collection of “Historic Daggers" made by MARTO.
Certificate of Origin and Quality.
Made in Toledo, Spain.
|
€ 72,55 Euros
($ 86,52 USD)
Product added
|
|
|
|
402806 dagger munich
(ref.: 402806)
During the 1600s, the dagger was a weapon carried by everyone at all times and was used with both hands when fighting with a sword or carried as a substitute for the sword. Munich Dagger has a well tempered 1095 high carbon steel blade. Full tang drilled. The pommel and guard are steel and the grip is wood wrapped in twisted steel wire cord for a perfect grip.
Includes sheath.
• Length: 49 cm
• Blade: 34 cm Width: 2 cm Thickness: 0.47 cm
• Weight: 567 g
|
€ 74,95 Euros
($ 89,39 USD)
Product added
|
|
|
|
shell dagger marshall historical
(ref.: MH-W1123)
A dagger is a knife blade and flattened sharp kick. It is longer than a dagger and shorter than a sword. Usually have double edge and guard for to protect the fist. It was used as a secondary weapon, complementing the sword. This sharp or sharp tip item must not be used for recreation or other medieval combat without modification previa.Esta dagger is taken from the original piece, of which only the guard and pommel is preserved, and responds to a design which could be dated between 1500 and 1600 approximately. The guard has a clamshell forend, a typical source of religious pilgrims and quite common in Europe. The grip is wood and is studded with brass nails giving a very regular appearance on the daggers of the time. The pommel and guard are made as the original part lost wax brass.
- Total Length: 38cm.
- Blade length: 26cm.
- Width of the hawks: 10'4cm.
- Sheath included.
Length: 40 Cm.
High: 4 Cm.
Width: 11 Cm.
|
€ 75,41 Euros
($ 89,93 USD)
Product added
|
|
|
|
masonic dagger
(ref.: 734)
Exclusive Masonic Dagger,
- Details of the handle with engravings and contrasts.
- Grip silver finish.
- Tempered Stainless Steel Blade.
- Overall: 43 cm/17 inches
High Quality Dagger of the Exclusive Collection of "Historic Daggers" made by MARTO.
Certificate of Origin and Quality.
Made in Toledo, Spain.
|
€ 72,55 Euros
($ 86,52 USD)
Product added
|
|
|
|
cobra steel lakonia - ref. 403213
(ref.: 403213)
This steel survival knife from Windlass's Cobra Collection is based on the deadly Spartan Short Sword. The Lakonia sword was shorter than other classical Greek swords and the Spartans preferred to carry the weapon "one step closer to the enemy".
Weather resistant rubber handle for greater comfort, perfect grip and shock absorption. impacts on a full spike. This tactical knife has a sharp hand-forged high quality X46Cr13 stainless steel blade, which increases its strength and weather resistance when fighting outdoors.
Includes a riveted leather sheath.
Total Length: 51 cm
Sheet: 35 cm x 5 cm approx.
Weight: 652 g approx.
Manufactured by Windlass Steelcrafts®
|
€ 43,58 Euros
($ 51,97 USD)
Product added
|
|
|
|
boabdil dagger
(ref.: 736)
Exclusive Boabdil Dagger,
- Detail of the handle with engravings and contrasts.
- Grip silver finish.
- Tempered Stainless Steel Blade.
- Overall: 43 cm/17 inches
High Quality Dagger of the Exclusive Collection of “Historic Daggers" made by MARTO.
Certificate of Origin and Quality.
Made in Toledo, Spain
|
€ 72,55 Euros
($ 86,52 USD)
Product added
|
|
|
|
holbein mercenary dagger - ref. 404483
(ref.: 404483)
Simple but ingenious in design, it was a very effective dagger when wielded by Swiss mercenaries during the 1500-1600s. It features a hand forged 1065 high carbon steel blade with a full tang. Hardened to 52 RC. The pieces are also handmade and finished in solid steel with a dark patina. This double-edged dagger is effective in the hand and wickedly fast. The contoured grip is made of stained wood. The pommel has 3 studs on its edge.
Includes a genuine leather sheath decorated with hand-applied aged steel reinforcements.
Total length: 37 cm
Blade length: 22 cm
Weight: 255 g
Material: 1065 High Carbon Steel
Manufactured by Windlass Steelcrafts®
|
€ 87,15 Euros
($ 103,94 USD)
Product added
|
|
|
|
spanish dagger xiii-xivth century marshall historical
(ref.: MH-W1104)
This dagger is based on the daggers appear in the "Alphonsine" documents. The dagger is made of steel and has fist and keep covered in horn with brass pins. It is a dagger, as seen in the above sources, both civil and military used. Includes leather sheath for better customization. This sharp or sharp tip item must not be used for recreation or other medieval combat without prior modification.
- Overall length: 36'5cm.
- Blade length: 23cm.
- Simple Leather sheath included.
|
€ 65,60 Euros
($ 78,23 USD)
Product added
|
|
|
|
bramham moor mercenary dagger - ref. 404485
(ref.: 404485)
Circa 15th century
This Battle of Bramham Moor Mercenary Dagger is named after the final battle of Percy's Rebellion of 1402-1408, which pitted Henry Percy, 1st Earl of Northumberland against the usurping king of England, Henry IV. The Battle of Bramham Moor was fought in the snow on a cold February 19: Northumberland was defeated, and the Earl himself died fighting in a furious rearguard as his army was routed. The power of the Percy family, although a branch of descendants would later come to prominence during the Wars of the Roses.
This long dagger has an unpolished stained wood hilt and low-gloss, matte brass fittings.
Includes matching brown leather scabbard decorated with matte brass throat and ferrule, dull. On the neck there is a belt hook decorated with a finely detailed roaring lion's head, worthy of a nobleman.
Total length: 44 cm approx.
Leaf length: 31 cm approx.
Blade width: 2.5 cm to ricasso
Blade thickness: 0.31 cm approx.
Weight: 396 g approx.
Material: High carbon steel. 1065
Manufactured by Windlass Steelcrafts®
|
€ 113,30 Euros
($ 135,12 USD)
Product added
|
|
|
|
roman dagger gold finished
(ref.: 738)
Exclusive Roman Dagger,
- Zamak handle with engraved gold-plated hand decorated with enamel in blue and red.
- Stainless steel blade acid etching in gold and black.
- Overall: 38 cm/15 inches
- Weight: 900 g
High Quality Roman Dagger of the Exclusive Collection of “Historic Daggers” made by MARTO.
Certificate of Quality and Origin, Made in Toledo (Spain)
|
€ 79,75 Euros
($ 95,11 USD)
Product added
|
|
|
|
raven claw fighting knife
(ref.: 401472)
This wicked Raven Claw Fighting Knife's hilt is cast metal and the deadly blade is blackened to a deep black luster and nicely balanced.
Includes metal and leather scabbard.
- Overall: 19
- 1/2"
- Blade: 13
- 1/4" Length, 1
- 1/2" Width, 3/16" Thickness
- Weight: 1 lb
- Material: 1055 High Carbon Steel
Made by Windlass Steelcrafts®
|
€ 67,98 Euros
($ 81,07 USD)
Product added
|
|
|
|
long m1 bayonet
(ref.: 803129)
The long blade M1 Garand Springfield is arguably the most desirable of all US bayonets and the real ones are almost impossible to find or afford.
Our reproduction is as close to the real thing as possible up to and including 1942 markings with flaming bomb.
- Blade: 16"
Made by Windlass Steelcrafts®
|
€ 61,01 Euros
($ 72,76 USD)
Product added
|
|
|
|
faithkeeper - dagger of the knights templar - ref. 404501
(ref.: 404501)
Faithkeeper
- Dagger of the Knights Templar
The main driving force of the Knights of the Knights Templar Order was faith. Faith in God, faith in his mission and his faith in others. This dagger is a testament to these valiant knights.
Windlass Steelcrafts' finest swordsmiths have spent hours on each blade, hand-forging the high carbon steel for optimal balance, speed and durability. Carrying this dagger in hand will leave no doubt that this magnificent weapon could have defended the Holy Land. The hand-wrapped genuine leather hilt and hand-finished solid steel parts show how tough and beautiful this dagger really is. The pommel features an inverted image of the Knights Templar Seal inset, which can be used as a wax seal for any important missive (wax not included). The cross is inscribed on both sides with the Latin phrase Militum Xristi
- Seal of the Soldiers of Christ. The diamond cross section blade is high carbon steel and has the Knights Templar Cross pierced on its ricasso.
The dagger includes a matching custom top grain leather sheath, which carries a belt loop and locking bolt to keep your weapon secure.
This dagger is truly a must have for any Knights Templar history buff. Companion of our Faithkeeper
- Knights Templar Sword #501691
Total Length: 39 cm
Blade Length: 25 cm
Blade Width: 3 cm
Blade Thickness: 0.39 cm
Weight: 453 g
Material: Carbon Steel, 1065
Manufactured by Windlass Steelcrafts®
|
€ 130,73 Euros
($ 155,91 USD)
Product added
|
|
|
|
rondel dagger xivth century marshall historical
(ref.: MH-W1113)
Daggers at first was the defensive weapon of civil populace, but come the fifteenth century become a secondary weapon for knights, nobles and merchants. In the codex Wallerstein gentlemen are examples of using this type of defense, and other pictorial references these daggers are all kinds of habits. So great was their use that we conclude they were very useful and practical. In the battle seems to be that its function was to quickly kill the badly wounded. We offer here is based on a dagger shield the fourteenth century, also with carved wooden handle.
- Total Length: 35cm.
- Blade length: 21'5cm.
- Handle: 9'5cm.
- Knob diameter: 7'4cm.
- Sheath included.
Length: 37 Cm.
High: 7 Cm.
Width: 8 Cm.
|
€ 82,76 Euros
($ 98,70 USD)
Product added
|
|
|
|
dagger conan - ref. 884024
(ref.: 884024)
This Conan dagger is the must-have weapon for the king of all barbarians. This oversized dagger features a 1065 high carbon steel blade, antique brass guard and pommel, and a leather covered handle.
Supplied in a wooden display case.
Total Length: 56 cm
Blade Length: 37 cm
Blade Width: 5 cm
Blade Thickness: 0.63 cm
Weight: 1,305 g
Material: 1065 Carbon Steel
Manufactured by Windlass Steelcrafts®
|
€ 139,44 Euros
($ 166,30 USD)
Product added
|
|
|
|
rondel dagger xv-xvith century marshall historical
(ref.: MH-W0601)
Daggers at first was the defensive weapon of civil populace, but come the fifteenth century become a secondary weapon for knights, nobles and merchants. In the codex Wallerstein gentlemen are examples of using this type of defense, and other pictorial references these daggers are all kinds of habits. So great was their use that we conclude they were very useful and practical. In the battle seems to be that its function was to quickly kill the badly wounded. We offer here is based on a dagger shield the fifteenth and sixteenth century, also with carved wooden handle.
- Total Length: 44cm.
- Blade length: 30'5cm.
- Leather sheath included.
|
€ 111,69 Euros
($ 133,20 USD)
Product added
|
|
|
|
|
WhatsApp 676 850 364