Due to COVID-19 our online store will continue to operate normally. The Customer Service hours will be from 09:30 a.m. to 3:30 p.m.. The delivery of the merchandise may suffer some delay due to the difficulties caused by this situation of Sanitary Alarm in Logistics.
We can make direct shipments to United States of all products that we have on our website.
Shipping costs are automatically calculated after adding products to the shopping cart.
The delivery Time of our products varies between ten and fifteen days.
For the purchase of Blank Firing Guns, you MUST indicate us your Weapons License Number
This version of the Lakonian short sword was copied from the book The Spartan Army. The Spartan army was one of the toughest on record; they devoted themselves to being the best of the best. This is a potent weapon that would be superb in the brutality of ancient hand to hand combat. The leaf shaped blade is high carbon steel, grip is bronze. A very effective close combat short sword.
Scabbard is wood covered in leather.
A dagger is a knife blade and flattened sharp kick. It is longer than a dagger and shorter than a sword. Usually have double edge and guard for to protect the fist. It was used as a secondary weapon, complementing the sword. This sharp or sharp tip item must not be used for recreation or other medieval combat without modification previa.Esta dagger is taken from the original piece, of which only the guard and pommel is preserved, and responds to a design which could be dated between 1500 and 1600 approximately. The guard has a clamshell forend, a typical source of religious pilgrims and quite common in Europe. The grip is wood and is studded with brass nails giving a very regular appearance on the daggers of the time. The pommel and guard are made as the original part lost wax brass.
A Scottish tradition, the original Sgian Dubhs were frequently worn under the shirt close to the armpit. Now it is traditional for the Sgian Dubh to be worn in the stocking of the Highlander and the knife is frequently called a stocking dirk. The term Sgian Dubh itself actually means black handled knife. Our high carbon steel Sgian Dubh has a black wooden handle that is carved on one side and smooth on the other. Embossed nickel silver fittings feature a thistle motif.
Sgian Dubh comes with a sheatH.
Large daggers were carried by knights and men - at - arms. While they were used for camp chores, they were mainly used on the battlefield where they were often the last line of defense. This classic form has a steel wheel pommel and down curving guard. The grip is wood covered in leather and the wide, strongly pointed blade is from tempered high carbon steel.
Includes matching scabbard.
Recreated in painstaking detail from an original, this rare Italian Carcano folding bayonet is a fully functional curiosity from WWII. Features the same button release mechanism that allows the ricasso to be pulled out, pivoted and slid back into either position. Open its a bayonet, closed it acts like a knife. It has a high carbon steel blade and is a unique find with a smart, dual purpose. Fits the 1938 Mannlicher - Carcano Infantry Rifle. This bayonet saw limited use in Italy and Finland - originals are very rare.
Includes original spec metal sheatH.
Popular in the Confederacy during the Civil War for its all - purpose capabilities, the D - Guard Bowie chopped branches, split logs, sliced saplings and even had its way with a Yankee or two. Re - enactors use it to dig cannon emplacements! The steel guard can withstand punishment and the massive, high carbon steel blade holds an edge well. A soldier on the move soon learns to travel light (ours is 1 lb. 5 oz. ), so a handmade bowie was often treasured as a backup weapon when the entire cavalry were "under the guns. " Grip is contoured wood with light stain.
Includes leather sheath with metal furniture.
We've been quite taken with this deep sea, hard hat divers knife for some time and recently had the chance to acquire a near perfect original. Used up to Vietnam by UDT and SEALS it’s a real deep sea treasure. We've constructed our replica to match the original in every way from original spec materials of high carbon steel, wood and brass to construction method, right down to the fit and finisH. This is a real beauty and ideal for any collector of military or maritime items.
Includes leather strap as many were originally issued.
This dagger is based on the daggers appear in the "Alphonsine" documents. The dagger is made of steel and has fist and keep covered in horn with brass pins. It is a dagger, as seen in the above sources, both civil and military used. Includes leather sheath for better customization. This sharp or sharp tip item must not be used for recreation or other medieval combat without prior modification.
On a trip to Venice we were touring the Doge's Palace and admiring the weapons when a particularly beautiful stiletto caught our eye, which we have reproduced here. Centuries old, its elegantly crafted contours and unique triangular blade were obviously shaped by a master; for the dagger shone with a positively happy wickedness. Stilettos come in many sizes, from delicate little hideout weapons to forthright long daggers suitable for use even as a main gauche, but this is certainly one of the more attractive ones we've come across. Blade face is beautifully hollowed. Grip is wood.
Stiletto comes complete with sheatH.
Made by one government contractor; Windlass Steelcrafts®. The original, official military issue! Hand forged from high carbon steel, each comes with regulation sheatH. A must for outdoor activities that require chopping and cutting.
This kukri beheads water buffaloes with a single stroke for the traditional Gurkha sacred ceremony. Very scarce! Only one is issued to each Gurkha Regiment in India. Specially carved native hardwood handle. The polished steel blade is a staggering 3/8? thick and more than 2 - 1/2 feet long.
It comes with regulation sheatH.
Circa 750. The seax, or sax, was universal in Northern Europe. Carried and used by the Saxons, Angles, Vikings and German tribes, its use probably dated before the fall of Rome and continued on into the early Middle Ages. From small knives with 3 - 4 inch blades to actual swords with blades of 27 - 28 inches and always single - edged, the profile of the seax varied a great deal. The original version of this large knife served from camp work to cutting work, on shipboard and for fighting if a sword or axe was not available.
Made by Windlass Steelcrafts, Steel: 1055 High Carbon, our replica has a brass lobed pommel and guard. The wood grip is studded with brass tacks for a very secure and comfortable grip. The blade is etched on both sides, flat ground, and capable of taking and holding a razor sharp edge. The remnants of this Seax can be seen in the British Museum.
Leather sheath is riveted and laced like the originals and has two thong slots.
This type of Charay knife (also known as a Charas, Churea and a Salawaryatagan) was first used in Indo - Persia, but quickly spread across the near east, deriving its common name, Khyber Knife, from its famed use against the British by the native tribes of the Khyber Pass area. It is still used in Afghanistan, Pakistan and Northern India today.
This Knife has an aged finish on the entire knife. including the worked and painted brass and buffalo horn grip on a full tang profile with the customary ring at the end of the grip that is often used for a wrist tie - down. The blade has a raised spine along the length of the blade, which allows the blade to be thin to hold a very sharp edge yet remain extremely strong.
The scabbard is worn thrust, in a number of positions under a belt, with blades ranging from 14? to 30?.
Daggers at first was the defensive weapon of civil populace, but come the fifteenth century become a secondary weapon for knights, nobles and merchants. In the codex Wallerstein gentlemen are examples of using this type of defense, and other pictorial references these daggers are all kinds of habits. So great was their use that we conclude they were very useful and practical. In the battle seems to be that its function was to quickly kill the badly wounded. We offer here is based on a dagger shield the fourteenth century, also with carved wooden handle.
Made by one government contractor; Windlass Steelcrafts. The original, official military issue! Hand forged from high carbon steel, each comes with regulation sheatH. A must for outdoor activities that require chopping and cutting.
This powerful chopping knife is issued to Gurkha Officers in India. The contoured handle is genuine buffalo horn. Features brass pommel and bolster.
Each comes with regulation sheath and with 2 accessory knives.
This Windlass Cobra Steel sword is based on the ancient Greek Kopis. Like the old sword, it has tremendous chopping power. However the point aligns perfectly with the wrist for a thrust, which makes this a good fighting pattern as well! Hard rubber scale grips on a full profile tang.
This knife’s full - tang blade is made of X46Cr13 high grade stainless steel, hardened to a Rockwell of 48° and fully tempered. Features factory - sharp edge. Ancient Greek Kopis design perfect for chopping and thrusting.
Like the old sword, it has tremendous chopping power. Weather resistant rubber handle for comfort, positive grip and shock absorption on a full profile tang. The hand - forged blade has been fully tempered in state - of - the - art computer controlled ovens, making it super tough and weather resistant when battling the great outdoors. Hardened to a Rockwell of 48°, it will “flex” in a cut and come back for more!
Includes a riveted leather scabbard
This machete is made of tempered 1085 high carbon steel with full tang.
Wood scales sandwich the full profile tang and are wrapped in suede. This sharpened machete comes with a genuine leather sheath and baldric with solid brass hardware. Meant to be worn over the right shoulder for an underhand, left side draw. This ensures your right hand stays free to draw that firearm you'll no doubt be carrying.
This sharpened knife comes with a genuine leather sheath and baldric with solid brass hardware. Overall length of 25 inches.