Mounts and complements

- Intended for 1” scopes, the GAMO 1” are available in high height.

- The high mounts are designed for rifles that require greater receiver clearance.
- These rings attach to any standard base.
- The opening below the scope also permits the use of the rifle´s regular sights.
- The standard-heigh rings are also intended for 1” scopes in situations that do not require additional receiver clearance.
- Mounting is similar to that of the 1” High Rings, with large locking nut with slots for coin or screwdriver use.

""With 1 screw cap rail Tube (mm) 25.4 Width (mm) 21 Carril (mm) 11 1x ring Weight (g) 51 Height (mm) 22 ""

- Intended for 1” scopes, the GAMO 1” are available in low height.

""With pin rail Weaver / Picatinny Tube (mm) 25.4 Width (mm) 16 Carril (mm) 21 1x ring Weight (g) 42 Height (mm) 25 ""

""With 1 screw cap rail. Tube (mm) 25.4 Length (cm) 12 Carril (mm) 11 Weight (g) 152 Height (mm) 14 ""

""With 3 screws rail stop. Tube (mm) 25.4 Length (cm) 10 Carril (mm) 11 Weight (g) 144 Height (mm) 20 ""

""With 3 screws rail stop Tube (mm) 25.4 Length (cm) 10 Carril (mm) 11 Weight (g) 112 Height (mm) 12 ""

""With 1 screw cap rail Tube (mm) 25.4 Length (cm) 10 Carril (mm) 22 Weight (g) 137 Height (mm) 12 ""

"" It allows you to convert a rail Dovetail (peak Milano 11mm) to Weaver / Picatinny 21mm Height (mm) 16 Length (cm) 12 Weight (g) 141 ""

Made of steel
High strength Torx screws
Antiretroceso tongue
Track: 21 mm
Tube: 25,4 mm
Height: 14.4 mm
Weight: 175.7 gr

Tube 25,4mm, Rail 21mm

OPTISAN QRA II Rings
- Tube 25.4
- Rail 21 - Medium
- 9.6 mm

Features:

• Adjust by lever.
• Reduced weight.
• Ring made of steel cut from a single block.
• Torx tonnels made of steel. Torx wrench included.
• Integrated recoil tongue suitable for Picatinny and Weaver rails.
• Tube diameter available in 30 mm and 25.4 mm
• Tube (mm): 25.4
• Lane (mm): 21
• Height (mm): Medium
  - 9.6
• Weight (g / Unit): 83

""With pin rail Weaver / Picatinny Tube (mm) 30 Width (mm) 21 Carril (mm) 21 1x ring Weight (g) 37 Height (mm) 10 ""

"" With 1 screw cap rail Tube (mm) 25.4 Width (mm) 21 Carril (mm) 11 1x ring Weight (g) 45 Height (mm) 14 ""

"" Tube (mm) 25.4 Width (mm) 16 Carril (mm) 11 1x ring Weight (g) 35 Height (mm) 12 ""

"" Tube (mm) 25.4 Width (mm) 15 Carril (mm) 11 1x ring Weight (g) 28 Height (mm) 12 ""

- Lens cover for Aimpoint Micro scopes
- Material: Rubber
- Valid for Aimpoint Micro scopes

Made of steel
High strength Torx screws
Antiretroceso tongue
Track: 21 mm
Tube: 25,4 mm
Height: 8.6 mm
Weight: 146.8 gr

Tube 25,4mm, Rail 21mm

OPTISAN QRA II Rings
- Tube 25.4
- Rail 21 - High -12.7 mm

Features:

• Adjust by lever.
• Reduced weight.
• Ring made of steel cut from a single block.
• Torx tonnels made of steel. Torx wrench included.
• Integrated recoil tongue suitable for Picatinny and Weaver rails.
• Tube diameter available in 30 mm and 25.4 mm
• Tube (mm): 25.4
• Lane (mm): 21
• Height (mm): High -12.7 mm
• Weight (g / Unit): 78

- Mounting is similar to that of the 1” High Rings, with large locking nut with slots for coin or screwdriver use

- The standard-heigh rings are also intended for 1” scopes in situations that do not require additional receiver clearance.

Adjustment by lever
Made of steel
High strength Torx screws
Antiretroceso tongue
Track: 21 mm
Tube: 25,4 mm
Height: 14,3 mm
Weight: 189.9 gr

Tube 25,4mm. Rail 21mm