|
|
We can make direct shipments to United States of all products that we have on our website.
Shipping costs are automatically calculated after adding products to the shopping cart.
The delivery Time of our products varies between ten and fifteen days.
For the purchase of Blank Firing Guns, you MUST indicate us your Weapons License Number
|
Medieval armours
Medieval armor made in Toledo.
german armorarms of xvth marshall historical
(ref.: MH-A0813)
|
|
Characterists:
In German medieval armor, combined arms still use media mesh, more typical of the Milanese armor; however, the comfort and versatility of these arms bound together by leather points gives ease of mocimiento and easily be repaired if damaged. The arms have several holes to raise or lower the height of the strut and armbands, belts help to better hold the arm.
- It has a leather tab to be set to the desired height.
- We suggest use with arming our jaqueta MH-CL0800.
Specifications:
- The arms are steel armor 1'2mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 58 Cm.
High: 15 Cm.
Width: 25 Cm.
|
€ 93,06 Euros
($ 110,98 USD)
 Product added
|
|
gorget with scope xvith century marshall historical
(ref.: MH-A0943)
|
|
Characterist:
This gorget is styled in Central Europe. In this combination, protection is rigid but articulated at the neck to achieve a great improvement in effectiveness. A versatile and simple gorget is an excellent choice for any infant or mercenary knight of the XVIth century. A perfect choice for your armor of medieval historical recreation.
Specifications:
- The gorget this fact 1'6mm steel.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 99,94 Euros
($ 119,19 USD)
Product added
|
|
leather water bottle iii marshall historical
(ref.: MH-MI0802)
|
|
Characterists:
It is a water bottle made of waxed leather, ready to use on your medieval recreations.
- Approximately 1.2 liter.
Specifications:
- Made of leather.
- Holds wounds, blemishes, or may not be 100% regularly. (Proof of authenticity).
- The roughness or color can vary from product to product, dyeing is done by natural methods and finish may vary depending on the original color of the skin.
- Use it in serious recommend that after 3-4 times during the following process is applicable: Pour bee wax hot on the inside, move in all directions to ensure consistency and allow to cool.
Length: 32 Cm.
High: 7 Cm.
Width: 21 Cm.
|
€ 79,55 Euros
($ 94,87 USD)
Product added
|
|
leather water bottle ii marshall historical
(ref.: MH-MI0801)
|
|
Characterists:
It is a water bottle made of waxed leather, ready to use on your medieval recreations.
- Approximately 1.2 liter.
Specifications:
- Made of leather.
- Holds wounds, blemishes, or may not be 100% regularly. (Proof of authenticity).
- The roughness or color can vary from product to product, dyeing is done by natural methods and finish may vary depending on the original color of the skin.
- Use it in serious recommend that after 3-4 times during the following process is applicable: Pour bee wax hot on the inside, move in all directions to ensure consistency and allow to cool.
Length: 31 Cm.
High: 8 Cm.
Width: 21 Cm.
|
€ 79,55 Euros
($ 94,87 USD)
Product added
|
|
medieval armor templar natural
(ref.: 945)
|
|
The white color was used in medieval times by the Knights Templar of the putter in shields, flags and standards, symbolizing their religious vocation. The color red is used to cross, wide arms embroidered on their shields, flags and center chest. Bermeja Cruz, granted by Pope Eugene III, for to be his sign the fight against the infidel.
- Templar Medieval armor used in the XIII century.
- Functional and articulated medieval armor.
- Carbon steel done in Galvanized.
- Details and drawing of the cross etched for acid.
- Height 2 meters.
- Weight 45 Kg
- Includes Cloak Cotton Cap with red Templar Cross and shield with templer cross.
- Also includes wood stand.
|
€ 4.009,13 Euros
($ 4.781,29 USD)
Product added
|
|
handforged hanger marshall historical
(ref.: MH-MI1504)
|
|
This is a piece of hand-forged steel, is used as support. Either to hang your shield in your camp store, or to hang your sword, this piece is essential for your medieval recreations.
Length: 17 Cm.
High: 4 Cm.
Width: 7 Cm.
|
€ 6,76 Euros
($ 8,06 USD)
Product added
|
|
surgical set marshall historical
(ref.: MH-MI1601)
|
|
Characterists:
The surgery begins its development in the XIIth and XIIIth centuries and most important studies are performed in Bologna, where a school of surgery was created. The most important is Lanfranci surgeons Milan, in the fourteenth century, in France, Henri de Mondeville excelled; surgeon to Philip IV and descriptor of a new treatment for surgical wounds, and Guy de Chauliac (Guido de Chauliaco) , which also makes a treaty will be reissued. Surgery in the Middle Ages is mainly practiced in monasteries where pilgrims, sick and hopeless are received, beginning to form germ hospices or hospitals.
Specifications:
- The set contains 8 pieces, among which are: forceps, scalpel, scissors, knife and bone saw.
- The tools are forged steel.
- It includes a sheath of suede.
Length: 35 Cm.
High: 3 Cm.
Width: 23 Cm.
|
€ 112,62 Euros
($ 134,31 USD)
Product added
|
|
churburg shoulders xvth century. marshall historical
(ref.: MH-A0940)
|
|
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. This armor is known as "S18" in the armory of Churburg, are attached to the pad window. This medieval armor supposedly belonged to Where Matsch and is said to be a Lombard work.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
|
€ 168,10 Euros
($ 200,48 USD)
Product added
|
|
shoulders of 1480. marshall historical
(ref.: MH-A0806)
|
|
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. The shoulder was a very vulnerable part and easy to attack with serious consequences for the defense of the opponent, as the injured shoulder dislocated arm and, therefore, left him immobile and useless to defend with the sword or other weapon. Hence the need to protect the shoulder pads.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 33 Cm.
High: 11 Cm.
Width: 24 Cm.
|
€ 105,82 Euros
($ 126,20 USD)
Product added
|
|
shoulders with besagew xvth century. marshall historical
(ref.: MH-A0805B)
|
|
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. The shoulder was a very vulnerable part and easy to attack with serious consequences for the defense of the opponent, as the injured shoulder dislocated arm and, therefore, left him immobile and useless to defend with the sword or other weapon. Hence the need to protect the shoulder pads.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 28 Cm.
High: 13 Cm.
Width: 23 Cm.
|
€ 106,54 Euros
($ 127,06 USD)
Product added
|
|
shoulders xvth century. marshall historical
(ref.: MH-A0805)
|
|
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. The shoulder was a very vulnerable part and easy to attack with serious consequences for the defense of the opponent, as the injured shoulder dislocated arm and, therefore, left him immobile and useless to defend with the sword or other weapon. Hence the need to protect the shoulder pads.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 24 Cm.
High: 15 Cm.
Width: 24 Cm.
|
€ 102,39 Euros
($ 122,11 USD)
Product added
|
|
suede shinguards marshall historical
(ref.: MHR-A0933S)
|
|
Characterist:
These pieces of leather and steel to protect the legs in armor are very agile and efficient road and easily get in a fight. These leg guards somewhat reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside.
- One size adjustable.
Specifications:
- The pads are suede and steel 1'4mm.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
- The tinting is made by natural methods and the finish may vary depending on the initial skin color.
|
€ 97,21 Euros
($ 115,93 USD)
Product added
|
|
avant shinguards marshall historical
(ref.: MH-A0919)
|
|
Characterist:
These pieces of steel to protect the legs in armor they are very agile and efficient road and ease in combat. These leg guards somewhat reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside.
- One size adjustable. (front: 34cm, side: 38cm, inner circumference: 44'5cm).
Specifications:
- The pads are steel 1'6mm.
- The thickness of steel can vary due to the manufacture of our products atresanal.
Length: 41 Cm.
High: 14 Cm.
Width: 27 Cm.
|
€ 160,48 Euros
($ 191,39 USD)
Product added
|
|
german legs xvth century marshall historical
(ref.: MH-A0902)
|
|
Characterist:
These legs are proper protections for the of the XVth century Germany, are very important for the cavalry, more protections are used for this type of troops. The work of these German legs is a work of undeniable beauty. These legs are a replica armor from southern Germany, which is now in an exhibition in Berlin. The lateral hinge system is also typical of the Valdemar Part VI that is currently in the Royal Armouries.
- One size adjustable.
Specifications:
- Legs Armor are 1'2mm steel.
- The thickness of steel can vary due to the manufacture of our products atresanal.
- It has a satin finish, which means it has a slightly reflective surface, similar to the finishes of the original frames.
Length: 68 Cm.
High: 26 Cm.
Width: 22 Cm.
|
€ 318,64 Euros
($ 380,01 USD)
Product added
|
|
armor legs xvth century marshall historical
(ref.: MH-A0786)
|
|
Characterist:
These legs are characteristic protections for the XVth century, are very important for the cavalry, more protections are used for this type of troops. These legs are a replica of a XVth century armor. A very good protection for your armor medieval recreation.
- One size adjustable. With brass buckles.
Specifications:
- The legs are steel armor 1'6mm.
- The thickness of steel can vary due to the manufacture of our products atresanal.
- It has a satin finish, which means it has a slightly reflective surface, similar to the finishes of the original frames.
Length: 58 Cm.
High: 25 Cm.
Width: 23 Cm.
|
€ 231,85 Euros
($ 276,50 USD)
Product added
|
|
steel-suede leather legs marshall historical
(ref.: MHR-A0934S)
|
|
Characterist:
These pieces of leather and steel to protect the legs in armor are very agile and efficient road and easily get in a fight. These leg guards somewhat reminiscent to those seen in Günther von Schwarzburg effigy where you can see the alternating metallic shielding on the outside and inside. The legs we offer with this model, in a way reminiscent to those carried by Sir Thomas Cheyne, composed of 5 rooms, with the plates on the inside and with a decorative farpado the end.
- One size adjustable.
Specifications:
- The pads are suede and steel 1'4mm.
- Holds wounds, flaws and not be 100% regularly. (Proof of authenticity).
- The roughness or color may vary slightly from one product to another.
|
€ 172,74 Euros
($ 206,01 USD)
Product added
|
|
avant armor legs marshall historical
(ref.: MH-A0914)
|
|
Characterist:
These pieces of steel to protect the legs in armor they are very agile and efficient road and ease in combat. These leg guards somehow remember the armor of Milan you can see the alternating metallic shielding on the outside and inside.
- One size adjustable.
Specifications:
- The legs are steel armor 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 45 Cm.
High: 23 Cm.
Width: 26 Cm.
|
€ 245,09 Euros
($ 292,29 USD)
Product added
|
|
vervelles (1 ud.) marshall historical
(ref.: MH-MI1509)
|
|
Vervelles are small metal staples used in Medieval armour to attach an aventail to a helmet. A leather cord would be woven through the top row of rings and the vervelles, securing the two together.
- Measures:
- Height: 9'9mm; Width: 7 mm; Internal Diameter: 4mm; Stud length: 3mm; Bolt diameter: 4'7mm.
|
€ 4,93 Euros
($ 5,88 USD)
Product added
|
|
shoulders xivth century. marshall historical
(ref.: MH-A0804)
|
|
Characterists:
Shoulder pads are a functional piece of medieval armor that covered the shoulders and defended, ie, the top and side of the trunk and Quadrumana, where the arm of the warrior born. The shoulder was a very vulnerable part and easy to attack with serious consequences for the defense of the opponent, as the injured shoulder dislocated arm and, therefore, left him immobile and useless to defend with the sword or other weapon. Hence the need to protect the shoulder pads.
- One size.
Specifications:
- The pads are steel 1'6mm.
- The thickness of the steel may vary due to handcrafting our products.
Length: 35 Cm.
High: 12 Cm.
Width: 24 Cm.
|
€ 89,63 Euros
($ 106,89 USD)
Product added
|
|
archer kneepads xvth century marshall historical
(ref.: MH-A0795)
|
|
Characterist:
These protections for own archers rodilllas of the XVth century is an ideal recreation of medieval mercenaries and part lower classes who have taken up arms. The joint protection has always been very important since one blow left you incapacitated, knees are a priority because they were the first in a protective armor appeared.
- One size adjustable.
Specifications:
- The knee armor is steel, the top of 1'4mm; 1'6mm knee and the bottom of 1'2mm.
- The thickness of steel can vary due to the manufacture of our products atresanal.
- It has a satin finish, which means it has a slightly reflective surface, similar to the finishes of the original frames.
Length: 30 Cm.
High: 21 Cm.
Width: 26 Cm.
|
€ 108,50 Euros
($ 129,40 USD)
Product added
|
|
|
WhatsApp 676 850 364