Mounts accessories

- Fiber optics spotlight for airguns
- Pack of two units

- Intended for 1” scopes, the GAMO 1” are available in high height.

- The high mounts are designed for rifles that require greater receiver clearance.
- These rings attach to any standard base.
- The opening below the scope also permits the use of the rifle´s regular sights.
- The standard-heigh rings are also intended for 1” scopes in situations that do not require additional receiver clearance.
- Mounting is similar to that of the 1” High Rings, with large locking nut with slots for coin or screwdriver use.

- Strip to place accessories on airguns

""With 1 screw cap rail Tube (mm) 25.4 Width (mm) 21 Carril (mm) 11 1x ring Weight (g) 51 Height (mm) 22 ""

- Intended for 1” scopes, the GAMO 1” are available in low height.

""With 1 screw cap rail Tube (mm) 25.4 Length (cm) 10 Carril (mm) 22 Weight (g) 137 Height (mm) 12 ""

"" It allows you to convert a rail Dovetail (peak Milano 11mm) to Weaver / Picatinny 21mm Height (mm) 16 Length (cm) 12 Weight (g) 141 ""

""With pin rail Weaver / Picatinny Tube (mm) 30 Width (mm) 21 Carril (mm) 21 1x ring Weight (g) 37 Height (mm) 10 ""

"" With 1 screw cap rail Tube (mm) 25.4 Width (mm) 21 Carril (mm) 11 1x ring Weight (g) 45 Height (mm) 14 ""

"" Tube (mm) 25.4 Width (mm) 16 Carril (mm) 11 1x ring Weight (g) 35 Height (mm) 12 ""

"" Tube (mm) 25.4 Width (mm) 15 Carril (mm) 11 1x ring Weight (g) 28 Height (mm) 12 ""

""With pin rail Weaver / Picatinny Tube (mm) 25.4 Width (mm) 16 Carril (mm) 21 1x ring Weight (g) 42 Height (mm) 25 ""

OPTISAN QRA II Rings
- Tube 25.4
- Rail 21 - Medium
- 9.6 mm

Features:

• Adjust by lever.
• Reduced weight.
• Ring made of steel cut from a single block.
• Torx tonnels made of steel. Torx wrench included.
• Integrated recoil tongue suitable for Picatinny and Weaver rails.
• Tube diameter available in 30 mm and 25.4 mm
• Tube (mm): 25.4
• Lane (mm): 21
• Height (mm): Medium
  - 9.6
• Weight (g / Unit): 83

Made of steel
High strength Torx screws
Antiretroceso tongue
Track: 21 mm
Tube: 25,4 mm
Height: 14.4 mm
Weight: 175.7 gr

Tube 25,4mm, Rail 21mm

""With 1 screw cap rail. Tube (mm) 25.4 Length (cm) 12 Carril (mm) 11 Weight (g) 152 Height (mm) 14 ""

""With 3 screws rail stop. Tube (mm) 25.4 Length (cm) 10 Carril (mm) 11 Weight (g) 144 Height (mm) 20 ""

- Mounting is similar to that of the 1” High Rings, with large locking nut with slots for coin or screwdriver use

- The standard-heigh rings are also intended for 1” scopes in situations that do not require additional receiver clearance.

OPTISAN QRA II Rings
- Tube 25.4
- Rail 21 - High -12.7 mm

Features:

• Adjust by lever.
• Reduced weight.
• Ring made of steel cut from a single block.
• Torx tonnels made of steel. Torx wrench included.
• Integrated recoil tongue suitable for Picatinny and Weaver rails.
• Tube diameter available in 30 mm and 25.4 mm
• Tube (mm): 25.4
• Lane (mm): 21
• Height (mm): High -12.7 mm
• Weight (g / Unit): 78

Made of steel
High strength Torx screws
Antiretroceso tongue
Track: 21 mm
Tube: 25,4 mm
Height: 8.6 mm
Weight: 146.8 gr

Tube 25,4mm, Rail 21mm