FALLKNIVEN SIDED SHARPENER FS4
- The diamond part is coated with titanium nitride and aluminum.
- The ceramic part is made with synthetic sapphires
- Both sides are affixed with 3M tape
- Used dry, but you can use a little soap and water to clean the surfaces.
- If you are right handed, take the tool with your left hand, push forward the catch lever at the top and press the metal button. A metal spring ejects the two sides sharpener, which is locked in position for use. To collect it, again press the metal button and close by hand to block sharpener. To prevent accidental opening, retract the upper lever.
- Closed Length: 98.7 mm
- 25 micron diamond grain
- Grain Ceramic 1 micron
- Zytel handle and stainless steel metal parts
Features
- Width
- 2.00 cm
- Height
- 9.00 cm
- Depth
- 18.00 cm
FALLKNIVEN SIDED SHARPENER FS4
https://www.aceros-de-hispania.com/en/1626-fallkniven-sided-sharpener-fs4.html
1626
FALLKNIVEN SIDED SHARPENER FS4
- The diamond part is coated with titanium nitride and aluminum.
- The ceramic part is made with synthetic sapphires
- Both sides are affixed with 3M tape
- Used dry, but you can use a little soap and water to clean the surfaces.
- If you are right handed, take the tool with your left hand, push forward the catch lever at the top and press the metal button. A metal spring ejects the two sides sharpener, which is locked in position for use. To collect it, again press the metal button and close by hand to block sharpener. To prevent accidental opening, retract the upper lever.
- Closed Length: 98.7 mm
- 25 micron diamond grain
- Grain Ceramic 1 micron
- Zytel handle and stainless steel metal parts
https://www.aceros-de-hispania.com/15702-large_default/fallkniven-sided-sharpener-fs4.jpg
20.66
instock
Fallkniven
20.66
20.66
0
0
/Sharpeners
/Sharpeners/Diamond sharpening steel
/Sharpeners/Sharpening stones
/Sharpeners/Knife sharpener
/Fallkniven
/Fallkniven/Sharpeners Fallkniven